Paul's slowly moving along with the final
blocking. Were hoping to get Bob back on
the front end today to get it finished up.
The front end is almost ready for primer. We'll first put a metal reinforcement along the back of
the hood at the cowl. It will  be formed to fit under the back edge and then glassed in. You can
see where we've glassed in the lower rear edge of the hood to fit with the lower body panel,
compared to the above pics
The metal piece below will be welded to another piece on
the other side and a piece along the lower edge and then
glassed on to the underside of the hood
Here the metal frame has been welded together, and
will be glassed on to the hood
Im still working on the valve covers, still have a
long way to go but, Im getting the hang of it
Oct  07