Were now in the process of blocking the
first primer stage. Were starting out with   
80 grit sand paper on this first stage, and
after the second primer we'll be going to  
220 grit paper.
You can see were we've sanded through the
high spots. After repeating this process with
the two more primer and sanding stages, the
car will be completely straight.
Below are some of the stages we put the Transmission through. From a rough cast aluminum
it was entirely sanded smooth. It is then primered and sanded two more times. Finally painted
with a gloss black paint, then sanded and polished before applying the Alsa Corp paint.
Here the two pics
on the left are
painted with the
Alsa Corp paint
and on the right
after clear coating